24V Trolling Motor Connection Kit — Series Battery Connection Without On-Board Charging

Running a 24V trolling motor and charging off the boat? The RCE24VBK series-wires two 12V batteries with Connect-Ease plug-and-play connectors, eliminating the loose jumper and stacked ring terminals that cause voltage loss and corrosion. Unplug and pull both batteries in seconds.

Connect-Ease's patented, self-cleaning, positive-lock connectors replace wing nuts and stacked ring terminals at the battery. Install once and every connection after that is plug-and-play — no tools, no crossed wires, no corroded posts, and batteries come out in seconds for charging or winter storage.

Compatible trolling motors and vehicles: Minn Kota Ultrex, Ulterra, Terrova and Riptide (24V / 70–80 lb); Garmin Force (24V); Lowrance Ghost (24V); MotorGuide Tour, X5 and Xi5 (24V); Rhodan 24V.

System voltage: 24V (two 12V in series). Recommended batteries: Two 12V AGM/flooded/LiFePO4 batteries in series, or one 24V single-case lithium (60–120Ah). Amperage and protection: 24V motors (70–80 lb) draw up to ~56A at full throttle. Protect with a 60A resettable breaker.